This is also indicated by a green color of the status field.

If a connection to the license dongle has been established, the dongle status is 'valid'.

The name of the dongle cannot be changed in the current TwinCAT 3 version.ĭouble-click on the dongle entry in the project tree to display the dongle properties in the License Device window. Each configured license dongle is displayed below the License node in the Solution Explorer: Select the desired license dongle and accept the selection with OK. The Select I/O Box/Terminal selection window opens.ģ. Adding a license dongle to the license configurationĢ. The following configuration is identical for both license dongle types. If the system does not find the license key USB stick, it cannot be selected later. In the TwinCAT System Manager, use a scan of the devices connected to the USB ports to check whether the system finds the C9900-L100 license key USB stick.

The USB dongle can may subsequently be plugged in to other USB ports.

If the system does not find the EL6070 License Key Terminal, the License Key Terminal cannot be selected later.Ĭonnecting the C9900-L100 license key USB stickĬonnect the C9900-L100 license key USB stick to a USB port of your IPC. In the TwinCAT System Manager, use a scan of the connected devices to check whether the system finds the EL6070 License Key Terminal. The License Key Terminal must subsequently always be plugged into this position in the EtherCAT bus. Integrate the EL6070 License Key Terminal into the EtherCAT network connected to the IPC to be licensed. Integrating the EL6070 License Key Terminal Before working with a TwinCAT 3 license dongle in TwinCAT 3 Engineering, set the target system into which the license dongle is integrated.

Win to usb license key